23 Greatest Steel Welding Wires

 

ER308L – MIG Stainless Steel Welding Wire – 11 Lb x 0.045″ (3 SPOOLS) - The welding should be operated in clean surface without rust, moist, oil contamination and dust. 8 1. 9 welding positions all introduction the main component of 308l is ultra-low c-18cr-8ni, it is mig wires that are widely used in welding austenitic stainless steel and it is all position welding. 40 20. To avoid bubbles protect from wind its speed reach 1. Shield gas must ensure not to operate with impurity shield gas, recommended rate of mixed gas ar + 1-3% o2. 2. 5 m/s. 63 0. 37 0. 030 1. 12 10. 37 0. Feeding wire smoothly will enable stable arc, excellent welding performance and spatter is very low. 50 0. 75 typical test result 0. The above parameters are for reference purpose and depend on diverse factors. 0 1. 00 9. The weld-ability is good. 030 0. 5. 023 1. 37 0. Er308l, wire, mig (gmaw), stainless steel aws a5. 65 19. 37 welding parameters (dc+) diameter (mm) 0. 030 0. Uses it is widely used in petrochemical, pressure vessel, food processing machinery, medical equipment, chemical fertilizer equipment, textile machinery, nuclear reactor such as 022cr19ni10 (sus 304l) and other materials of welding. Electrode extension 15-25mm 4. 00~11. 00~2. 2 welding current (amps) 70~150 100~200 140~220 notes 1. 30~0. Run tests, evaluate and set your welding parameters before starting the welding job. 75 0. 50~22. Operation flow rate of shield gas 20-25l/min. Ferrite in the deposited metal enables excellent corrosion-resistance and crack-resistance. 35 chemical composition mo p s cu requirement 0. Chemical composition (%) chemical composition c mn si cr ni requirement 0. 3. 00 typical test result 0.

 

Blue Demon ER317L .035x 30# Spool Stainless Steel Welding Wire - The lower carbon level also makes the weld metal less susceptible to intergranular corrosion. It contains a higher level of molybdenum that offers improved resistance to pitting and crevice corrosion. Welding current decep welding positions f, v, oh, h.

 

Blue Demon ER70S-6 x .035 x 44# Spool Carbon Steel Welding Wire (Copper Free) - Typical applications include general shop applications with poor fit up or rusty, oily plates. The high silicon content increases the fluidity of the weld pool, thus creating a smoother bead appearance and resulting in minimal post weld grinding. It is designed to provide porosity free, x-ray quality welds at the highest tensile strength of all the plain carbon steel wires.

 

ER309L – MIG Stainless Steel Welding Wire – 11 Lb x 0.045″ - 030 0. 42 19. Run tests, evaluate and set your welding parameters before starting the welding job. 00 11. 2. Operation flow rate of shield gas 20-25l/min. 00 0. 030 0. 023 1. 50 0. 9 welding positions all introduction high-alloy solid wire electrode, annealed and layer wound, excellent welding characteristics thanks to high si content, suitable for dissimilar joints and buffer layers, maximum operating temperature 300 °c uses austenite-ferrite joints (dissimilar), cladding, corrosion-resistant layers on non-alloyed construction steels, buffer layers. 75 typical test result 2. 59 0. 00~20. The above parameters are for reference purpose and depend on diverse factors. 00~3. 30~0. 008 0. 12 12. Chemical composition (%) chemical composition c mn si cr ni requirement 0. 59 chemical composition mo p s cu requirement 2. 5 m/s. 65 18. 3. 28 welding parameters (dc+) diameter (mm) 0. 00 typical test result 0. 009 0. 00~14. Electrode extension 15-25mm 4. 90 0. 5. 030 1. 8 1. The welding should be operated in clean surface without rust, moist, oil contamination and dust. 2 welding current (amps) 70~150 100~200 140~220 notes 1. 0 1. Shield gas must ensure not to operate with impurity shield gas, recommended rate of mixed gas ar + 1-3% o2. To avoid bubbles protect from wind its speed reach 1. Er309l, wire, mig (gmaw), stainless steel aws a5. 00~2.

 

Blue Demon ER312 X .045 X 30# Spool stainless steel welding wire - Er312 stainless steel wire is used for welding cast alloys of similar composition as well as dissimilar metals including stainless to mild steels.

 

ER70S-6 – MIG Mild & Low Alloy Steel Welding Wire – 11 Lb x 0.030″ (2 SPOOLS) - Low-spatter thanks to high chemical purity applications structural steel. 013 0. 035″ dc+ 100% co2 420-520 220-250 24-25 0. Er70s-6, wire, mig (gmaw), mild & low alloy steel aws a5. 85 0. 012 general result ni cr mo v cu requirement 0. 15 0. 025 0. 15 1. 125 mechanical properties as welded test item rm(n/mm2) rel/rp0. Shipbuilding and repair. 002 0. 077 1. 50 typical test result 0. 2(n/mm2) a (%) kv2(j)-40 requirement 500 420 22 47 typical test result 555 450 29 77, 95, 83 the above parameters are for reference purpose and depend on diverse factors. 031 0. 045″ dc+ 75% ar/25% co2 90-110 70-80 16-17 0. 035″ dc+ 75% ar/25% co2 105-115 40-55 16-17 0. Medium to heavy mill scale base material. 15 0. 004 0. 15 0. 035″ dc+ 100% co2 105-115 50-60 17-18 0. For industry, craft and repair businesses. Ideal for automation and robotic applications welding parameters wire diameter polarity shield gas wire speed (in/min) amperage (amps) voltage 0. 045″ dc+ 75% ar/25% co2 220-270 200-210 21-22 wire composition (%) chemical composition c mn si s p requirement 0. 045″ dc+ 100% co2 220-270 220-250 24-25 0. 06~0. 87 0. Run tests, evaluate and set your welding parameters before starting the welding job. 80~1. 025 typical test result 0. 03 0. 017 0. 18 welding positions all introduction mild steel solid mig wire with manganese and silicon deoxidizers tolerate medium to heavy mill scale surfaces. 045″ dc+ 100% co2 90-110 90-110 19-20 0. 15 0. 40~1. Copper-plated and layer wound. 035″ dc+ 75% ar/25% co2 420-520 200-210 23-24 0. 45 0.

 

INEFIL ER70S-6 .023-Inch on 10-Pound Spool Carbon Steel Mig Solid Welding Wire - Shielding gas is required 80-percent ar+20-percent co2 or 100-percent co2,all positions, single and multi pass welding. Made in italy from the finest quality materials using state of the art technology under highly respected labor conditions. Approvals abs, tuv, db, dnv, lrs, rina, gl. Mig solid welding wire for carbon and carbon-manganese steels. Low spatter, high feedability, porosity free, good bead appearance, easy to weld.

 

Weldflame ER70S-6 2-Pound 2# Spool Mild Steel Welding Wire 0.035 Inch - Er70s-6 is a mild steel welding wire that contains higher levels of manganese and silicon that other standard grades of mig wire to produce high quality welds when used on dirty, oily, or rusty steel.

 

Fema E70S-6 .030″ 11lb General Purpose Mild Steel MiG welding wire - 030 wire is particularly good multiple general thickness mild steel welding with 115v, 230v or 3 ph mig units. Free shipping within the continental usa. Best results are when used with 75/25 (argon/co2) mig gas or can also be used with more economical 100% co2 gas. It has been sold in specialist welding and tool distributors as well as some of the largest home improvement stores world wide, such as sears, lowes, costco, canadian tire, northern, b&q, halfords, mitre 10 to mention just a few. Excellent general purpose wire for the welding of most mild steels. Other areas please e mail shipping destination for cost. The product for sale is 1 spool of new fema branded and packaged. Precision wound wire, allows smoother wire flow than random spooled wire. E70s-6 mig welding wire is a good general purpose welding wire for fabrication of mild steel. Why you should buy it a high quality, fema branded and color packaged e70s6 mild steel mig welding wire. Features include. Precision wound wire produces smoother welding wire flow. 8mm), 11lb (5kg), er70s-6 high quality general purpose precision wound mig welding wire. 11lb is ideal for economy yet practicality on both carted and many portable mig machines. Standard 8″ spool size with standard 2″ spindle hole opening. General purpose, steel fabrication, maintenance, farm and or agricultural equipment fabrication, general metal shop applications. 30 thickness is excellent for welding both thin and thicker mild steel. 030″ (. Who is fema never heard of fema well over its 60 year long history, it has manufactured oem welding equipment for many well known welding and tool brands throughout the world including black & decker, schumacher, lincoln, sip, boc, mac tools, fimer, sears, snap on, boss, esab. The list goes on. The general purpose size of general purpose wire best results are obtained when using argon co2 shielding gas, but co2 is adequate.

 

ER70S-6 – MIG Mild & Low Alloy Steel Welding Wire – 11 Lb x 0.030″ - 125 mechanical properties as welded test item rm(n/mm2) rel/rp0. Er70s-6, wire, mig (gmaw), mild & low alloy steel aws a5. 035″ dc+ 100% co2 420-520 220-250 24-25 0. 85 0. 077 1. 012 general result ni cr mo v cu requirement 0. 035″ dc+ 75% ar/25% co2 105-115 40-55 16-17 0. Shipbuilding and repair. 025 0. Low-spatter thanks to high chemical purity applications structural steel. 045″ dc+ 100% co2 90-110 90-110 19-20 0. 40~1. 45 0. 035″ dc+ 75% ar/25% co2 420-520 200-210 23-24 0. 06~0. 87 0. 2(n/mm2) a (%) kv2(j)-40 requirement 500 420 22 47 typical test result 555 450 29 77, 95, 83 the above parameters are for reference purpose and depend on diverse factors. 15 0. Ideal for automation and robotic applications welding parameters wire diameter polarity shield gas wire speed (in/min) amperage (amps) voltage 0. 025 typical test result 0. Run tests, evaluate and set your welding parameters before starting the welding job. 045″ dc+ 100% co2 220-270 220-250 24-25 0. 045″ dc+ 75% ar/25% co2 90-110 70-80 16-17 0. For industry, craft and repair businesses. 15 0. Copper-plated and layer wound. 031 0. 035″ dc+ 100% co2 105-115 50-60 17-18 0. 18 welding positions all introduction mild steel solid mig wire with manganese and silicon deoxidizers tolerate medium to heavy mill scale surfaces. 50 typical test result 0. 15 0. 002 0. Medium to heavy mill scale base material. 017 0. 013 0. 80~1. 004 0. 03 0. 15 0. 15 1. 045″ dc+ 75% ar/25% co2 220-270 200-210 21-22 wire composition (%) chemical composition c mn si s p requirement 0.

 

ER70S-6 – MIG Mild & Low Alloy Steel Welding Wire – 11 Lb x 0.045″ - 15 0. Copper-plated and layer wound. 012 general result ni cr mo v cu requirement 0. 2(n/mm2) a (%) kv2(j)-40 requirement 500 420 22 47 typical test result 555 450 29 77, 95, 83 the above parameters are for reference purpose and depend on diverse factors. 50 typical test result 0. 45 0. Shipbuilding and repair. 035″ dc+ 100% co2 105-115 50-60 17-18 0. 035″ dc+ 75% ar/25% co2 105-115 40-55 16-17 0. 125 mechanical properties as welded test item rm(n/mm2) rel/rp0. 002 0. 013 0. 03 0. 15 0. 15 0. 035″ dc+ 100% co2 420-520 220-250 24-25 0. 045″ dc+ 100% co2 220-270 220-250 24-25 0. 031 0. 035″ dc+ 75% ar/25% co2 420-520 200-210 23-24 0. 80~1. 077 1. 15 0. Run tests, evaluate and set your welding parameters before starting the welding job. 045″ dc+ 75% ar/25% co2 220-270 200-210 21-22 wire composition (%) chemical composition c mn si s p requirement 0. Low-spatter thanks to high chemical purity applications structural steel. 15 1. 017 0. 85 0. 025 typical test result 0. 004 0. 025 0. 40~1. 18 welding positions all introduction mild steel solid mig wire with manganese and silicon deoxidizers tolerate medium to heavy mill scale surfaces. 06~0. 87 0. Er70s-6, wire, mig (gmaw), mild & low alloy steel aws a5. Medium to heavy mill scale base material. For industry, craft and repair businesses. 045″ dc+ 100% co2 90-110 90-110 19-20 0. Ideal for automation and robotic applications welding parameters wire diameter polarity shield gas wire speed (in/min) amperage (amps) voltage 0. 045″ dc+ 75% ar/25% co2 90-110 70-80 16-17 0.

 

Hobart H522506-R19 0.030-Inch 2-Pound ER308L Stainless Steel Welding Wire - Item is manufactured in united states. This product is easy to use easy to install and highly durable. These hobart mig wire rolls have the smooth and clean surfaces required for efficient wire feed. An extra low carbon wire for the welding of type 304l, 321 and 347 stainless steels. 2-pound spool. Provides excellent notch toughness at very low temperature.

 

Blue Demon ER316L X .030 X 2# Spool stainless steel welding wire - This filler metal is primarily used for welding low carbon molybdenum bearing austenitic alloys. Aws a59, welding current decep. This low carbon alloy is not as strong as 316h at elevated temperatures.

 

ER70S-6 – MIG Mild & Low Alloy Steel Welding Wire – 11 Lb x 0.035″ (2 SPOOLS) - 035″ dc+ 75% ar/25% co2 420-520 200-210 23-24 0. 025 typical test result 0. 012 general result ni cr mo v cu requirement 0. 06~0. 15 1. 035″ dc+ 100% co2 420-520 220-250 24-25 0. 50 typical test result 0. 035″ dc+ 75% ar/25% co2 105-115 40-55 16-17 0. 035″ dc+ 100% co2 105-115 50-60 17-18 0. 045″ dc+ 100% co2 220-270 220-250 24-25 0. 87 0. 004 0. 2(n/mm2) a (%) kv2(j)-40 requirement 500 420 22 47 typical test result 555 450 29 77, 95, 83 the above parameters are for reference purpose and depend on diverse factors. 80~1. 15 0. 013 0. 45 0. 031 0. 85 0. Medium to heavy mill scale base material. Run tests, evaluate and set your welding parameters before starting the welding job. 002 0. 025 0. 045″ dc+ 100% co2 90-110 90-110 19-20 0. 077 1. Shipbuilding and repair. 15 0. 125 mechanical properties as welded test item rm(n/mm2) rel/rp0. 15 0. 15 0. 03 0. For industry, craft and repair businesses. 18 welding positions all introduction mild steel solid mig wire with manganese and silicon deoxidizers tolerate medium to heavy mill scale surfaces. 045″ dc+ 75% ar/25% co2 90-110 70-80 16-17 0. Er70s-6, wire, mig (gmaw), mild & low alloy steel aws a5. 40~1. Copper-plated and layer wound. 045″ dc+ 75% ar/25% co2 220-270 200-210 21-22 wire composition (%) chemical composition c mn si s p requirement 0. Ideal for automation and robotic applications welding parameters wire diameter polarity shield gas wire speed (in/min) amperage (amps) voltage 0. 017 0. Low-spatter thanks to high chemical purity applications structural steel.

 

Fema ER308L .030″ 11lb Stainless Steel MiG welding wire - 030″ (. This is better for reducing carbide precipitation minimising the possibility of weld fracture. The er308l has lower carbon content compared with the 308. Product price includes free shipping throughout the continental usa. 8mm), 11lb (5kg), er308l awsa 5. Er308l stainless steel mig welding wire is an excellent general purpose welding wire for the welding of stainless steel. Best results are used obtained when used with helium/argon/co2 or with argon/co2 gas. Standard 8″ spool size with 2″ spindle hole opening. For sale is 1 spool of new fema. 9 high quality general purpose stainless steel mig welding wire.

 

ER70S-6 – MIG Mild & Low Alloy Steel Welding Wire – 11 Lb x 0.023″ - 035″ dc+ 100% co2 420-520 220-250 24-25 0. 2(n/mm2) a (%) kv2(j)-40 requirement 500 420 22 47 typical test result 555 450 29 77, 95, 83 the above parameters are for reference purpose and depend on diverse factors. Medium to heavy mill scale base material. 077 1. 85 0. 013 0. 031 0. 125 mechanical properties as welded test item rm(n/mm2) rel/rp0. 15 0. Copper-plated and layer wound. 06~0. 18 welding positions all introduction mild steel solid mig wire with manganese and silicon deoxidizers tolerate medium to heavy mill scale surfaces. 03 0. 025 0. 15 0. 045″ dc+ 75% ar/25% co2 220-270 200-210 21-22 wire composition (%) chemical composition c mn si s p requirement 0. 40~1. 87 0. Er70s-6, wire, mig (gmaw), mild & low alloy steel aws a5. 004 0. 15 1. For industry, craft and repair businesses. 50 typical test result 0. 012 general result ni cr mo v cu requirement 0. Low-spatter thanks to high chemical purity applications structural steel. 80~1. Shipbuilding and repair. 035″ dc+ 75% ar/25% co2 105-115 40-55 16-17 0. 025 typical test result 0. 017 0. 45 0. Ideal for automation and robotic applications welding parameters wire diameter polarity shield gas wire speed (in/min) amperage (amps) voltage 0. 045″ dc+ 75% ar/25% co2 90-110 70-80 16-17 0. 035″ dc+ 100% co2 105-115 50-60 17-18 0. 045″ dc+ 100% co2 90-110 90-110 19-20 0. Run tests, evaluate and set your welding parameters before starting the welding job. 035″ dc+ 75% ar/25% co2 420-520 200-210 23-24 0. 15 0. 002 0. 045″ dc+ 100% co2 220-270 220-250 24-25 0. 15 0.

 

Mountain MTNWEW-6210 .023″ Steel Welding Wire (.023″ Steel ER70S-6 Welding Wire 2 Lb. (4″ Spool)) - Provides high quality welds even when used on oxidized or oily surfaces. Compact 4″ spool of 023″ diameter er70s-6 mild steel mig welding wire for portable machines. General purpose mig welding wire for all mild steel materials. Designed to produce highest tensile strength welds of all plain carbon steel wires.

 

ER316L – MIG Stainless Steel Welding Wire – 11 Lb x 0.035″ (3 SPOOLS) - Welding positions all, feeding wire smoothly will enable stable arc, excellent welding performance and very low spatter. High molybdenum stainless steel welding wire. The main component of er316l is 18cr-12ni-2mo. Uses for corrosive enviroments, it has good resistance for acetic acid, sulfuric acid, phosphoric acid and salt. 3 x 11 lb spool.

 

2 spools Fema E70S-6 .030″ 1lb General Purpose Mild Steel MiG welding wire - 8mm), 1lb (0. Standard 4″ spool size with standard 5/8″ spindle hole opening. Why you should buy it a high quality, fema branded and color packaged e70s6 mild steel mig welding wire. 45kg), er70s-6 high quality general purpose precision wound mig welding wire. 030 wire is particularly good multiple general thickness mild steel welding with 115v and 230v mig units. Precision wound wire, allows smoother wire flow than random spooled wire. Excellent general purpose wire for the welding of most mild steels. Free shipping within the continental usa. Features include. E70s-6 mig welding wire is a good general purpose welding wire for fabrication of mild steel. Other areas please e mail shipping destination for cost. 030″ (. 30 thickness is excellent for welding both thin and thicker mild steel. 1lb is ideal for economy yet practicality on all portable mig machines. The product for sale are 2 spools of new fema branded and packaged. Who is fema never heard of fema well over its 60 year long history, it has manufactured oem welding equipment for many well known welding and tool brands throughout the world including black & decker, schumacher, lincoln, sip, boc, mac tools, fimer, sears, snap on, boss, esab. Best results are when used with 75/25 (argon/co2) mig gas or can also be used with more economical 100% co2 gas. It has been sold in specialist welding and tool distributors as well as some of the largest home improvement stores world wide, such as sears, lowes, costco, canadian tire, northern, b&q, halfords, mitre 10 to mention just a few. Precision wound wire produces smoother welding wire flow. General purpose, steel fabrication, maintenance, farm and or agricultural equipment fabrication, general metal shop applications. The list goes on. The general purpose size of general purpose wire best results are obtained when using argon co2 shielding gas, but co2 is adequate.

 

ER308L – MIG Stainless Steel Welding Wire – 27.5 Lb x 0.035″ - Operation flow rate of shield gas 20-25l/min. 12 10. 75 0. Electrode extension 15-25mm 4. To avoid bubbles protect from wind its speed reach 1. Chemical composition (%) chemical composition c mn si cr ni requirement 0. 30~0. 00 typical test result 0. 37 0. 023 1. 37 0. Run tests, evaluate and set your welding parameters before starting the welding job. The weld-ability is good. 37 0. 65 19. 8 1. 2 welding current (amps) 70~150 100~200 140~220 notes 1. 50 0. 00~2. Feeding wire smoothly will enable stable arc, excellent welding performance and spatter is very low. 00~11. 5 m/s. Uses it is widely used in petrochemical, pressure vessel, food processing machinery, medical equipment, chemical fertilizer equipment, textile machinery, nuclear reactor such as 022cr19ni10 (sus 304l) and other materials of welding. 0 1. The welding should be operated in clean surface without rust, moist, oil contamination and dust. 030 1. 030 0. 3. 00 9. 37 welding parameters (dc+) diameter (mm) 0. 9 welding positions all introduction the main component of 308l is ultra-low c-18cr-8ni, it is mig wires that are widely used in welding austenitic stainless steel and it is all position welding. 40 20. 5. 35 chemical composition mo p s cu requirement 0. 030 0. 50~22. 75 typical test result 0. Ferrite in the deposited metal enables excellent corrosion-resistance and crack-resistance. Er308l, wire, mig (gmaw), stainless steel aws a5. 63 0. The above parameters are for reference purpose and depend on diverse factors. Shield gas must ensure not to operate with impurity shield gas, recommended rate of mixed gas ar + 1-3% o2. 2.

 

ER70S-6 – MIG Mild & Low Alloy Steel Welding Wire – 11 Lb x 0.045″ (2 SPOOLS) - 013 0. For industry, craft and repair businesses. Run tests, evaluate and set your welding parameters before starting the welding job. 002 0. 125 mechanical properties as welded test item rm(n/mm2) rel/rp0. 18 welding positions all introduction mild steel solid mig wire with manganese and silicon deoxidizers tolerate medium to heavy mill scale surfaces. 045″ dc+ 100% co2 90-110 90-110 19-20 0. 025 typical test result 0. 045″ dc+ 75% ar/25% co2 90-110 70-80 16-17 0. Medium to heavy mill scale base material. 15 0. 035″ dc+ 100% co2 105-115 50-60 17-18 0. 40~1. 012 general result ni cr mo v cu requirement 0. 017 0. Copper-plated and layer wound. 077 1. 031 0. 045″ dc+ 100% co2 220-270 220-250 24-25 0. 45 0. 80~1. 87 0. 06~0. Shipbuilding and repair. 025 0. 004 0. 03 0. 15 0. 15 1. 50 typical test result 0. 035″ dc+ 75% ar/25% co2 420-520 200-210 23-24 0. 045″ dc+ 75% ar/25% co2 220-270 200-210 21-22 wire composition (%) chemical composition c mn si s p requirement 0. 15 0. Er70s-6, wire, mig (gmaw), mild & low alloy steel aws a5. 035″ dc+ 100% co2 420-520 220-250 24-25 0. Ideal for automation and robotic applications welding parameters wire diameter polarity shield gas wire speed (in/min) amperage (amps) voltage 0. 2(n/mm2) a (%) kv2(j)-40 requirement 500 420 22 47 typical test result 555 450 29 77, 95, 83 the above parameters are for reference purpose and depend on diverse factors. 85 0. Low-spatter thanks to high chemical purity applications structural steel. 15 0. 035″ dc+ 75% ar/25% co2 105-115 40-55 16-17 0.

 

Fema ER308L .035″ 10lb Stainless Steel MiG welding wire - For sale is 1 spool of new fema. Best results are used obtained when used with helium/argon/co2 or with argon/co2 gas. This is better for reducing carbide precipitation minimising the possibility of weld fracture. The er308l has lower carbon content compared with the 308. Er308l stainless steel mig welding wire is an excellent general purpose welding wire for the welding of stainless steel. Product price includes free shipping throughout the continental usa. 9 high quality general purpose stainless steel mig welding wire. 5kg), er308l awsa 5. Standard 8″ spool size with 2″ spindle hole opening. 035″ (1mm), 10lb (4.

 

INEFIL ER70S-6 .030-Inch on 2-Pound Spool Carbon Steel Mig Solid Welding Wire - Made in italy from the finest quality materials using state of the art technology under highly respected labor conditions. Shielding gas is required 80-percent ar+20-percent co2 or 100-percent co2,all positions, single and multi pass welding. Mig solid welding wire for carbon and carbon-manganese steels. Approvals abs, tuv, db, dnv, lrs, rina, gl. Low spatter, high feedability, porosity free, good bead appearance, easy to weld.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.