ER316L – MIG Stainless Steel Welding Wire – 11 Lb x 0.045″ (3 SPOOLS)
- Uses for corrosive enviroments, it has good resistance for acetic acid, sulfuric acid, phosphoric acid and salt. The main component of er316l is 18cr-12ni-2mo. 3 x 11 lb spool. High molybdenum stainless steel welding wire. Welding positions all, feeding wire smoothly will enable stable arc, excellent welding performance and very low spatter.
Blue Demon ER410 x .045 x 33# Spool Martensitic Stainless Steel Welding Wire
- Welding current dcep welding positions f, v, oh, v. It is also commonly used for welding overlay on carbon steels to resist corrosion, erosion, or abrasion. Because this is an air hardening type of material the joint to be welded should be preheated to 350 degrees f.
Blue Demon 309LFC-O X .035 X 1# Spool stainless steel flux core gasless welding wire
- It requires no shielding gas and works well when joining 309l to itself or other mild steels. 309lfc-o is a self shielding variety of er309l stainless steel welding wire.
Blue Demon ER409NB-045-33 .045 x 33 lb Spool Cb ferritic stainless steel welding wire
- This improves corrosion resistance, increases strength at high temperatures, and promotes ferritic microstructure. The addition of niobium leads to preferential reaction with carbon which interrupts chromium from forming carbides. Er409nb is a ferritic stainless steel welding alloy used to weld types 409 and 409ti base metals.
ER316L – MIG Stainless Steel Welding Wire – 33 Lb x 0.045″
- The main component of er316l is 18cr-12ni-2mo. High molybdenum stainless steel welding wire. Every package comes with material certification. Uses for corrosive enviroments, it has good resistance for acetic acid, sulfuric acid, phosphoric acid and salt. 33 lb spool.
ER316L – MIG Stainless Steel Welding Wire – 27.5 Lb x 0.030″
- Every package comes with material certification. 275 lb spool. High molybdenum stainless steel welding wire. The main component of er316l is 18cr-12ni-2mo. Uses for corrosive enviroments, it has good resistance for acetic acid, sulfuric acid, phosphoric acid and salt.
ER309L – MIG Stainless Steel Welding Wire – 11 Lb x 0.045″ (3 SPOOLS)
- 030 1. 42 19. 00 11. 00~20. The welding should be operated in clean surface without rust, moist, oil contamination and dust. 28 welding parameters (dc+) diameter (mm) 0. 2 welding current (amps) 70~150 100~200 140~220 notes 1. 5. 00~3. 009 0. 0 1. 2. Operation flow rate of shield gas 20-25l/min. 9 welding positions all introduction high-alloy solid wire electrode, annealed and layer wound, excellent welding characteristics thanks to high si content, suitable for dissimilar joints and buffer layers, maximum operating temperature 300 °c uses austenite-ferrite joints (dissimilar), cladding, corrosion-resistant layers on non-alloyed construction steels, buffer layers. 90 0. To avoid bubbles protect from wind its speed reach 1. 008 0. Chemical composition (%) chemical composition c mn si cr ni requirement 0. 023 1. 50 0. 59 chemical composition mo p s cu requirement 2. 75 typical test result 2. Shield gas must ensure not to operate with impurity shield gas, recommended rate of mixed gas ar + 1-3% o2. 030 0. 5 m/s. Er309l, wire, mig (gmaw), stainless steel aws a5. 00~2. 12 12. Electrode extension 15-25mm 4. The above parameters are for reference purpose and depend on diverse factors. Run tests, evaluate and set your welding parameters before starting the welding job. 8 1. 3. 00~14. 00 typical test result 0. 30~0. 00 0. 65 18. 030 0. 59 0.
ER308L – MIG Stainless Steel Welding Wire – 11 Lb x 0.035″ (3 SPOOLS)
- Chemical composition (%) chemical composition c mn si cr ni requirement 0. The above parameters are for reference purpose and depend on diverse factors. 65 19. 030 0. Ferrite in the deposited metal enables excellent corrosion-resistance and crack-resistance. 00 9. Uses it is widely used in petrochemical, pressure vessel, food processing machinery, medical equipment, chemical fertilizer equipment, textile machinery, nuclear reactor such as 022cr19ni10 (sus 304l) and other materials of welding. 00~2. 75 0. 37 0. 5 m/s. Er308l, wire, mig (gmaw), stainless steel aws a5. 9 welding positions all introduction the main component of 308l is ultra-low c-18cr-8ni, it is mig wires that are widely used in welding austenitic stainless steel and it is all position welding. 030 1. 8 1. Electrode extension 15-25mm 4. 2 welding current (amps) 70~150 100~200 140~220 notes 1. 0 1. 00 typical test result 0. 12 10. 37 0. 030 0. 37 0. 50 0. 023 1. 40 20. 75 typical test result 0. The welding should be operated in clean surface without rust, moist, oil contamination and dust. 5. Feeding wire smoothly will enable stable arc, excellent welding performance and spatter is very low. 50~22. 2. Shield gas must ensure not to operate with impurity shield gas, recommended rate of mixed gas ar + 1-3% o2. The weld-ability is good. Run tests, evaluate and set your welding parameters before starting the welding job. 35 chemical composition mo p s cu requirement 0. To avoid bubbles protect from wind its speed reach 1. 30~0. 37 welding parameters (dc+) diameter (mm) 0. 63 0. Operation flow rate of shield gas 20-25l/min. 3. 00~11.
Blue Demon ER410NIMO x .045 x 33# Spool Martensitic Stainless Steel Welding Wire
- Post weld treatment should not exceed 1150 degrees f, higher temperatures may result in hardening. Welding current dcep welding position f, v, oh, h. Preheating and interpass temperature of not less than 300 degrees f.
ER316L – MIG Stainless Steel Welding Wire – 11 Lb x 0.035″ (3 SPOOLS)
- Welding positions all, feeding wire smoothly will enable stable arc, excellent welding performance and very low spatter. High molybdenum stainless steel welding wire. The main component of er316l is 18cr-12ni-2mo. 3 x 11 lb spool. Uses for corrosive enviroments, it has good resistance for acetic acid, sulfuric acid, phosphoric acid and salt.
Blue Demon 316FC-O X .035 X 1# Spool stainless steel flux core gasless welding wire
- 316fc-o is a self shielding flux core version of solid er316l stainless steel welding wire. It has a low carbon content.
Blue Demon ER309L X .030 X 2# Spool stainless steel welding wire
- Aws a59, welding current dcep. Er309l works well for dissimilar joints that undergo heat treatment. The extra low carbon provides good resistance to carbide precipitation and inter granular corrosion.
ER308L – MIG Stainless Steel Welding Wire – 27.5 Lb x 0.035″
- To avoid bubbles protect from wind its speed reach 1. 00 typical test result 0. 5 m/s. 023 1. The welding should be operated in clean surface without rust, moist, oil contamination and dust. 3. 030 0. 75 0. 5. The weld-ability is good. 37 0. 63 0. 2. 35 chemical composition mo p s cu requirement 0. 00 9. 030 1. Feeding wire smoothly will enable stable arc, excellent welding performance and spatter is very low. Run tests, evaluate and set your welding parameters before starting the welding job. 50 0. Ferrite in the deposited metal enables excellent corrosion-resistance and crack-resistance. Operation flow rate of shield gas 20-25l/min. Uses it is widely used in petrochemical, pressure vessel, food processing machinery, medical equipment, chemical fertilizer equipment, textile machinery, nuclear reactor such as 022cr19ni10 (sus 304l) and other materials of welding. 2 welding current (amps) 70~150 100~200 140~220 notes 1. 00~11. 9 welding positions all introduction the main component of 308l is ultra-low c-18cr-8ni, it is mig wires that are widely used in welding austenitic stainless steel and it is all position welding. The above parameters are for reference purpose and depend on diverse factors. 37 0. 8 1. Chemical composition (%) chemical composition c mn si cr ni requirement 0. 65 19. 00~2. Electrode extension 15-25mm 4. 37 welding parameters (dc+) diameter (mm) 0. 50~22. 75 typical test result 0. 0 1. Shield gas must ensure not to operate with impurity shield gas, recommended rate of mixed gas ar + 1-3% o2. 30~0. 030 0. 37 0. 12 10. 40 20. Er308l, wire, mig (gmaw), stainless steel aws a5.
Firepower 1440-0245 Stainless Steel MIG Welding Wire 0.030-Inch Diameter, 2-Pound
- Dc reverse polarity. 030-inch diameter and is a premium aws class er308l wire for stainless steel mig welding. Firepower 1440-0245 er 308l stainless steel mig welding wire has a 0. 2-pound spool. It is best when used with a clean or prepared welding surface and requires a shielding gas.
ER309L – MIG Stainless Steel Welding Wire – 11 Lb x 0.035″
- 00~3. Run tests, evaluate and set your welding parameters before starting the welding job. 00~2. 75 typical test result 2. 030 0. Electrode extension 15-25mm 4. 00 11. 28 welding parameters (dc+) diameter (mm) 0. 65 18. 90 0. 9 welding positions all introduction high-alloy solid wire electrode, annealed and layer wound, excellent welding characteristics thanks to high si content, suitable for dissimilar joints and buffer layers, maximum operating temperature 300 °c uses austenite-ferrite joints (dissimilar), cladding, corrosion-resistant layers on non-alloyed construction steels, buffer layers. 009 0. 00~14. 50 0. The above parameters are for reference purpose and depend on diverse factors. 30~0. The welding should be operated in clean surface without rust, moist, oil contamination and dust. 00 typical test result 0. 8 1. 00 0. 59 0. 5 m/s. 030 1. To avoid bubbles protect from wind its speed reach 1. 008 0. 2. 030 0. 023 1. Chemical composition (%) chemical composition c mn si cr ni requirement 0. 3. 42 19. Shield gas must ensure not to operate with impurity shield gas, recommended rate of mixed gas ar + 1-3% o2. Operation flow rate of shield gas 20-25l/min. Er309l, wire, mig (gmaw), stainless steel aws a5. 12 12. 00~20. 5. 2 welding current (amps) 70~150 100~200 140~220 notes 1. 59 chemical composition mo p s cu requirement 2. 0 1.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
