ATD Tools 80477 700 Lumen LED Tube Light
- Lithium-ion rechargeable battery for longer life and consistent power. Automatic shut-off and overcharge protection for optimal battery life. Tough impact resistant ergonomic housing, ip54 dust and water resistance. Constant current design provides consistent light output, removable swivel hooks with magnets allows hands-free use. Rubberized handle provides a non-slip grip. Cob led produces 700 lumens of bright light. (1) smd led top light provides an additional flashlight function, 50 lumens.
ATD Tools 70400 35″ 7-Drawer Flip-Top Tool Cart
- 2 mil epoxy-polyester powder coat paint finish, heavy-duty push handle and removable 416mm ball-bearing drawer slides. This 35″ 7-drawer flip-top tool cart features full-extension gas struts support till compartment lid, hmc high security tubular locking system with keys, 3.
ATD Tools 5163 2-in-1 S-Cam Brake Tool
- 2-in-1 s-cam brake tool, offers technicians a more efficient method for changing brake shoes on an s-cam drum brake assembly. The tool is comprised of a steel shaft with a u-shaped fork on one end to stretch the retaining spring so that both halves of the brake shoe are held together, which enables the user to hook up the pin. An s-shaped device on the opposite end enables the user to position the brake shoes in a way that allows leverage for installation of the rollers. The hooked end pulls the brake shoes apart so that the rollers can be installed faster and more safely.
ATD Tools 7812 Spray Gun Filter, (Pack of 3)
- Spray gun filters, 3 pack. Air inlet 1/4″ npt. Air outlet 1/4″ npt. Traps moisture, rust, scale and oil aerosols that pass through conventional filters.
ATD Tools 10511 7″ Shop Polisher
- Slow start, weighs only 7 pounds. 1 rubber pad 1 velcro pad. Adjustable side and “d” handles positioned for left or right handed use. 11 amps, 1,000-3,000 rpm. On/off trigger, dial speed control. Extra set of brushes.
ATD Tools 125 35-Piece Torx Bit Set
- Blow molded case. 35 torx bit set, 1/4″, 3/8″ and 1/2″ drive torx t-8, 10, 15, 20, 25, 27, 30, 40, 45, 50, 55, 60 tamperproof t-7, 8, 9, 10, 15, 20, 25, 27, 40, 45, 47, 50, 55, internal, e-4, 5, 6, 7, 8, 10, 12, 14, 16, 18. 35 piece 1/4″, 3/8″ and 1/2″ drive chrome vanadium torx bit set. Atd torx bits are 2 piece construction for strength and made with s-2 steel. Complete in a blow molded case.
ATD Tools (575) 10-Piece Metric T-Handle Hex Key Set
- 5mm, (1) 3mm, (1) 4mm, (1) 4. The set includes (1) 2mm, (1) 2. The shafts are made from high quality steel. 5mm, (1) 5mm, (1) 5. 10 piece metric t-handle hex key set features plastic handle grips for comfort and increased turning power. 5mm, (1) 6mm, (1) 8mm and (1) 10mm.
ATD Tools 80369.0 Folding Mini Thin Light with Top Light
- The atd (80369) folding mini thin light with top light features an ultra-thin design that pivots and folds flat to allow inspection in the tightest work areas, automatic shut-off and overcharging protection for optimal battery life, a versatile 3-in-1 charging system, (5) smd led bulbs illuminate the inspection area, 120 lumens, (1) smd led top light offers an additional flashlight function, 30 lumens and a light wand pivots +180 degrees and -180 degrees for easy handling and storage.
ATD Tools 915 12-Piece Universal Snap-Ring Pliers Set
- (1). (1). (1). 070″ tip 45 degree pliers (atd-91508). 090″ tip 45 degree pliers (atd-91511). 038″ tip straight pliers (atd-91501). (1). Heavy-duty, heat treated chrome moly steel pliers with cushion grip handles. Includes (1). (1). (1). (1). (1). 047″ tip 90 degree pliers (atd-91506). (1). 090″ tip 90 degree pliers (atd-91512). For use with internal or external snap rings. 070″ tip straight piers (atd-91507). 070″ tip 90 degree pliers (atd-91509). 038″ tip 90 degree pliers (atd-91503). 090″ tip straight piers (atd-91510). (1). 047″ tip straight piers (atd-91504). (1). 038″ tip 45 degree pliers (atd-91502). 047″ tip 45 degree pliers (atd-91505).
ATD Tools 80350 Thin Light with Top Light
- The versatile 3-in-1 charging system allows charge from 120v ac with included wall power plug, charge from 12v dc with included vehicle power plug and charge from usb charging port with included usb cord. Features include (10) smd led bulbs for a wider and brighter lighting area, (1) smd led bulb top light offers an additional flashlight function, lithium-ion rechargeable battery for longer life and consistent power, light head rotates 180 degrees and pivots 180 degrees to direct light to work area, super strong magnetic base sticks to steel surfaces, slim light body can reach into any narrow space easily, automatic shut-off and overcharge protection for optimal battery life and tough, impact resistant ergonomic housing. The ultra-thin design rotates and swivels to allow inspection in the tightest work areas.
ATD Tools 99650 XL Ratcheting Wrench Set with 10 Metric Sizes – 5 Piece
- 180 degree flex feature and extra-long reach allows access to hard-to-reach places. Offset box end gear provides more surface contact and access to recessed fasteners. 10 metric sizes 8 millimeter thru 19 millimeter. 72-tooth ratcheting system for high torque and 5 degree swing arc for operation in tight areas. Sliding switch button for quick change ratcheting direction.
ATD Tools 6903 HVLP Mini Touch-Up Spray Gun
- Required compressor 1 hp. Maximum pattern at 8″ distance 9″. High volume, low pressure, minimizes overspray. Perfect for small jobs, detail and touch-up work. Net weight with cup 0. Operating pressure 29 psi. Fully adjustable wide fan pattern control. Products high quality paint atomization. Air inlet thread 1/4″ npsm. 75 pounds. 0 nozzle. 125 cubic capacity stainless steel cup. 1. Average air consumption 6-9cfm.
ATD Tools 4601 3/8″ Drive 6-Point 42-Piece SAE/Metric/Standard and Deep Impact Socket Set
- Set includes everything needed to do the following 3/16″, 1/4″, 5/16 and 3/8″ double and single flares 475mm 6mm and 8mm double, bubble and single flares. Flares can be achieved along frame rails or areas in the engine compartment, saving the user time from having to remove components or complete lines to make repairs. The slender, low-profile design of this tool allows the user to make flares on the vehicle and in tight spaces. The clamp and set screws put pressure directly over the tube reducing the chance of the tube slipping from the clamp this increases the overall life of the clamp by not wearing down the teeth inside from repeated slipping. Packed in heavy duty blow molded case.
ATD Tools 1385 104-Piece SAE/Metric Master Socket Set
- M14 3/8″ drive tamperproof (atd-239) m16 1/2″ drive tamperproof (atd-241) m18 1/2″ drive tamperproof (atd-242). (10) triple square spline bit sockets m4 1/4″ drive (atd-232) m5 1/4″ drive (atd-233) m6 1/4″ drive (atd-234) m8 3/8″ drive (atd-235) m9 3/8″ drive (atd-236) m10 3/8″ drive (atd-237) m12 3/8″ drive (atd-238). Includes triple square spline bit sockets. Packaged in a blow molded case. Sockets are made from heat treated chrome vanadium steel for strength and durability.
ATD Tools 3150 2″ Coarse Grit Quick Change Surface Conditioning Disc; (Pack of 100)
- The higher cut rates reduce time, effort and cost. The type iii fastener features a roll-on/roll-off style. It is also more rigid and aggressive than buffing pads. They are designed for removing heavy rust and oxidation as well as gasket and paint removal. Recommended applications include plastic products, machinery for the chemical and food industries, stainless steel furniture, automotive, aircraft and aerospace industries and stainless steel metal fabricators. These are quick change surface conditioning scrim black (scsb) discs with r fastening system.
ATD Tools 7466 Heavy Duty Car Dolly Set
- Each heavy duty dolly has 1,500 pounds capacity (6,000 pounds capacity for 4 dollies). This frees up valuable garage or shop space. It is excellent for moving cars, trucks, trailers, lawn tractors, and more against a wall or into a corner. This allows the vehicle to be moved in any direction.
ATD Tools 7442 Underhoist Stand with Foot Pedal – 3/4 Ton Capacity
- Capacity 3/4 tons. Item may ship in more than one box and may arrive separately. Min-max height 53-5/8″, 79-1/8″, with 12″ diameter flat base and foot pedal.
ATD Tools 8763 Large Rectangular Magnetic Tool Holder
- Permanent magnet with rubber scratch guard. 14″ x 6″ tray can be used horizontally, vertically, even upside down. 3 magnets. Triple 14″ x 6″ tray.
ATD Tools 7387 Short Hydraulic Bottle Jack – 20 Ton Capacity
- Full power in vertical or horizontal position. Weight capacity 20-ton short. Saddle dimension 2″. 2 and 3 piece handles. Maximum height 11-1/4″. Equipped with patented built-in by-pass device mechanism. Minimum height 6-1/2″. Screw extension 1-5/8″. Heat treated extension screws on all models through 20 ton. Meets asme/ansi-pald safety standards. Operating force 101 pounds.
ATD Tools 5183 Heavy Duty Drain Tub – 30 Quart Capacity
- Features include easy pouring and disposal of liquids, a large apron for washing or draining parts and dimensions of 33 inches long x 22 inches wide x 8 inches deep. This 30 quarts heavy-duty drain tub is perfect for draining radiators, crankcases, transmissions, differentials on cars and trucks.
ATD Tools 81046 Low Profile Creeper – 400 lbs. Capacity
- 2 inch minimum height. 400 pounds capacity. 3 inch polyurethane wheels allow for smooth movement around the shop floor. 1/2 inch ground clearance.
ATD Tools 13784 13-Piece SAE Hex Bit Socket Set
- Bits are made from s2 steel to meet or exceed torque specifications. Sae hex bit sockets. The bit socket warranty is voided if they are used with any type of impact tools. Sockets are made from heat treated chrome vanadium steel for strength and durability.
ATD Tools 6508 8-Piece Stud Remover Set
- 2 piece telescoping suction tube fits 30 to 55 gal drums. Complete with a standard bung adapter, tough all steel foot valve and piston valve. 8 pc stud remover set (atd-6508). Rugged epoxy finish pump assembly. Pump delivers a full 10 oz of fluid per stroke.
ATD Tools ATD-81015 Foldable Creeper Pad, 1 Pack
- Made from heavy-duty eva foam that is water, chemical and impact resistant. End section folds to form headrest. Thick cushion design for comfort. Great for working in the garage or outdoors.
ATD Tools 8762 Stainless Steel Square Magnetic Parts Tray
- Permanent magnet with rubber scratch guard. 14″ x 6″ tray can be used horizontally, vertically, even upside down. 4 magnets. Square 10-3/4″ x 10-3/4″.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
