Best and Coolest 22 Cam Locks

 

Disc Tumbler Cam Lock, Nickel, Key C413A - Offset (in) 11/32, 0 for door thickness (in) 1-1/8 housing length 1 7/16 country of origin (subject to change) united states. Price for each includes two keys, two cams, hardware unlock turn direction either finish bright nickel number of pins 5 key type alike unlocking radius (deg) 90 cam width (in) 5/8 cam length (in) 1 1/8, 1 1/2 item disc tumbler cam lock mounting hole dia (in) 3/4 head dia (in) 7/8 max latching distance (in) 1-3/32, 1-7/16, 1-25/32 key number c413a.

 

Zdmak T10098 Cam Lock Set for Vw Audi Timing - Applicablevw polo, classic, golf, bora, beetle,caddy(97-04) suit engine 1. Special tools for setting volkswagen camshaft in the correct position for diesel engine. T10098a replaces the old style 3418. 9 sdi/tdi vw tool number t10098 new style tdi cam lock bar tool for locking the camshaft same as t10098a applicable to 1999-2003 vw tdi used for locking the camshaft on vw tdi without removing the valve cover. Tool is often used in conjunction with tdc tool (pin)3359 not included with this sale. Vw audi cam alignment set same as t10098 timing lock plate and set screws.

 

Disc Tumbler Cam Lock, Nickel, Key C420A - Offset (in) 11/32, 0 for door thickness (in) 15/64 housing length 5/8 country of origin (subject to change) united states. Price for each includes two keys, two cams, hardware unlock turn direction either finish bright nickel number of pins 5 key type alike unlocking radius (deg) 90 cam width (in) 5/8 cam length (in) 1 1/8, 1 1/2 item disc tumbler cam lock mounting hole dia (in) 3/4 head dia (in) 7/8 max latching distance (in) 9/32, 5/8, 31/32 key number c420a.

 

Stanley Hardware Bright Brass Sash Cam Lock 755886 - Finish, bright brass. Adds security. Features. Draws window frames together for a tight seal. Includes fasteners. This can-action sash lock is designed to lock and draw tight double-hung and sliding windows.

 

RV Designer L445 5/8 Econo Cam Lock Non Locking Thumb - Straight and off-set cam included. For use on compartment doors. Econo cam compartment lock. Easy to install. Non-locking thumb turn.

 

Jackson Safety QNB-4-BP Quick-Trik Camlock and Locking Bar Cable Connector with Single Dome Nose (Case of 6) - They are available with semi-rigid insulators, or with flexible insulators, and tapered ends that cover the cable jacket and lock out moisture, oil and dirt. Quik-trik top-of-the-line cable connector halves have morse-tappered sections that are drawn together with a cam and locking bar, for maximum conductivity. Camlock and locking bar draw together for virtually unbreakable connection. For cables 3/0 and 4/0.

 

GearWrench 3859D 6 Piece Cam-Lock Style Convertible Snap Ring Pliers Set by GearWrench - Gearwrench 3859d 6 piece cam-lock style convertible snap ring pliers set. Pipe size4″. Sk hand tool 7781 cam-lock convertible retaining ring 18 degree pliers, 0038-inch.

 

Armstrong 68-046 0.038-Inch Tip Internal/External 90-Degree Retaining Ring Pliers-Cam-Lock Convertible - Fixed tips are precision formed and induction hardened for accurate fit and long wear. For use with internal or external retaining rings. Convertible fast and easy, compress handles slightly, depress shift button, and turn knob. Can be used on 1/4″ to 2″ retaining rings.

 

SK Hand Tool 7781 Cam-Lock Convertible Retaining Ring 18 Degree Pliers, 0.038-Inch - 070″) in 18⁰ or 90⁰ angled tips. Exclusive patented design allows quick change-over from internal or external ring applications. Handles internal and external rings from 1/4″ to 2″. 047″, 0. 038″, 0. Simply push button on knob and rotate pivot. Features three popular tip diameters (0. Kits include custom molded impact resistant storage case.

 

Ford 4.6L/5.4L F150 Expedition 3 Valve Cam Phaser Lock Out Kit Noise Repair Kit - They are machined to tight tolerances to eliminate chatter and in extreme cases, the locks may need the edges filed a bit for clearance. Some of the newer aftermarket cam phasers are made differently and will not accomodate these locks. It will fit a factory new ford phaser but they do not fit all aftermarket phasers. These cam locks are made to fit with very tight tolerances. These are intended for use in stock/factory cam phaser applications.

 

Hobart 770032 Camlock-Style Cable Connector for Size No.4 to No.1 Cable - Solid brass camlock-style cable connectors. Rural king, hobart cable lug 1/0 wire, 1/2″ stud 770041. Hard rubber sheath insulates the connection.

 

Armstrong 68-045 0.038-Inch Tip Internal/External 18-Degree Retaining Ring Pliers-Cam-Lock Convertible - For use with internal or external retaining rings. Can be used on 1/4″ to 2″ retaining rings. Fixed tips are precision formed and induction hardened for accurate fit and long wear. Convertible fast and easy, compress handles slightly, depress shift button, and turn knob.

 

Sierra CL49310 Cam Lock Kit - All sierra products meet or exceed the original equipment part it replaces. Sierra products are engineered to meet todayâs high horsepower engine demands and stand up in the harsh marine environment. Sierra supplies many oem engine manufacturers and boat builders hundreds of quality parts every day.

 

Mercedes 272 / 273 Cam Lock Tool -   because of the unusual timing degrees used in these engines, the cam could move out of time when the chain is removed if not secured.   The original timing chain has no timing marks.   The cam lock bolts to the head holding the cam in position during service operations.   Cam movement during re-assembly could cause engine damage. Lock the left intake cam in place while servicing the cam chain drive system cam lock holds the cam in proper timing position reducing service time eliminates the need for a second technician to hold the cam during service reduces potential for assembling the cam chain out of time resulting in engine damage 2005, 2012 mercedes 272 & 273 engines (see application chart) servicing the cam chain drive system on 2005, 2012 mercedes 272 & 273 engines could result in engine damage if the left intake cam is not properly held in place.

 

Combi-Cam Ultra 7440S-No-Key 3-Dial With 0.62 in. Cylinder Lock - Cylinder nut screw and washercombination cabinet lock dimension. Combi-cam ultra combination cam lock offers code retrievable capabilities and keyless access. Features. 1-12 in. Looking for a perfect solution for cabinets gym lockers mailboxes drawers equipment. 97 in. Easy installationincluded with lock. Perfect for healthcare education gyms school lockers drawers or doors. Easy to use. Lock depth, 1. Cylinder diameter, 34 in. Lock height is 2. Straight cam. Wide. Quick installation. Ability to install horizontally and vertically. Width is 1. 10 in. 75 in. Combination cam lock. Over 1000 possible combinations. Easy to read dials and open and close indicators. 625 in. Cylinder length, 0.

 

COMP Cams 4605 Cam Lock Plate for Chevrolet V8 - Comp cams cam lock plate works in chevrolet v8 applications. Comp cams cam lock plate helps prevent cam bolts from backing out. It is effective at any rpm level or load. It has bendable locking tabs and comes with special high-strength bolts.

 

RV Designer L428 Econo Cam Lock (1-1/8 Keyed – Code 751) - Econo cam lock 1-1/8 keyed, code 751constructed of durable stainless steeltwo keys included along with one straight and one offset cam. 1-1/8 inches. 025.

 

Jackson Safety UB-4-BP Uni-Trik Camlock Cable Connector with Double Dome Nose (Case of 6) - Camlock secure connection mates the male and female halves. For cables 3/0 through 4/0. Uni-trik cable connectors are complete insulated, with no exposed metal, and feature large, double dome-nose cable screws to ensure a virtually unbreakable, high conductivity connection. A form fitting rubber outer jacket prevents screws from shorting out and tapered ends lock out moisture, oil and dirt.

 

Sir Tools 2727 Dual Overhead Spoke Cam Lock - All twin or quad cam equipped with a timing belt pulley sprocket on each cam. This tool will remain rigid, not allowing for any movement of cams, saving your timing. 5″ long, left/right hand threaded rods. Please note with quad cam pulley engines 2 sets of this tool 2727 are needed to complete the task (you would need to purchase two of these). Applicable all twin or quad cam engines with timing belt pulley sprocket on each cam. The shorter needed for confined spaces where the rods might interfere with the fire-wall or other auto part. Used for the crucial task of securing twin cam pulleys from rotating during the r&r of timing belt. Twin and quad cam spoke lock device universal twin cam number 2727 used for securing twin cam pulleys. Fully constricted onto the spokes of the cam pulleys and locking down the securing wing nuts, reveals a 6 point locking mechanism. Fully adjustable, this tool comes complete with 1 pair 8″ and 1 pair 4.

 

Padlockable Cam Lock 7840-US26 Padlockable Cam Lock – Chrome- Pack of 2 - School lockers. Popular uses. Anywhere whereby padlocks are desired to lock up doors or drawers. Gym lockers. Clubhouse lockers. Finish chrome. The padlockable cam lock is a solid metal cam lock with a built-in finger pull that allows a keyed or combination padlock to secure the drawer or door.

 

Combination Wrenches – 22mm combination wrenchchrome cam lock - -Style size1 1/4”, drop-forged alloy steel, unitssae, price is for each. -Style size14mm, drop-forged alloy steel, unitsmetric, price is for each. -Style size7/8”, drop-forged alloy steel, unitssae, price is for each. -Style size19mm, drop-forged alloy steel, unitsmetric, price is for each. -Style size10mm, drop-forged alloy steel, unitsmetric, price is for each. -Style size3/8”, drop-forged alloy steel, unitssae, price is for each. -Style size17mm, drop-forged alloy steel, unitsmetric, price is for each. -long pattern. -Style size9/16”, drop-forged alloy steel, unitssae, price is for each. -Meets or exceeds federal and ansi specifications. -Style size1 1/8”, drop-forged alloy steel, unitssae, price is for each. -Style size7/16”, drop-forged alloy steel, unitssae, price is for each. -Style size11/16”, drop-forged alloy steel, unitssae, price is for each. -Style size12mm, drop-forged alloy steel, unitsmetric, price is for each. -Style size3/4”, drop-forged alloy steel, unitsinch, price is for each. -Hardened and tempered. Color/finish -finish nickel chrome plated. -Style size1 1/16”, drop-forged alloy steel, unitssae, price is for each. -Style size27mm, drop-forged alloy steel, unitsmetric, price is for each. -No. -Opening type open/box. -Style size15/16”, drop-forged alloy steel, unitssae, price is for each. -Testing and approvals. -Style size1/2”, drop-forged alloy steel, unitssae, price is for each. -Style size32mm, drop-forged alloy steel, unitsmetric, price is for each. -Style size1”, drop-forged alloy steel, unitssae, price is for each. -Style size13/16”, drop-forged alloy steel, unitssae, price is for each. Of points 12. -Style size9mm, drop-forged alloy steel, unitsmetric, price is for each. 018-04-072 features -raised panel. -Style size5/8”, drop-forged alloy steel, unitssae, price is for each.

 

Pony 04-063 13mm Combination Wrenchchrome Cam Lock - Raised panel. Convertible fast and easy, compress handles slightly, depress shift button, and turn knob. Fixed tips are precision formed and induction hardened for accurate fit and long wear. Can be used on 1/4″ to 2″ retaining rings.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.