Best and Coolest 24 Carbon Arcs

 

1/2″ X 17″ Copper-Coated Jointed Carbon Air/Carbon Arc Gouging Electrode (100 per box) - 5” d. In case of arc rays or electric shock, employ normal first aid techniques and call a physician immediately. If electrodes become wet, bake at 300 f for 10 hours before using. -Superior arc starting and arc stability cooler operation to maintain the diameter of the electrode at the point of the arc purified carbon content for product consistencey from lot-to-lot, run-to-run faster gouging yields, excellent metal removal rates that challenge the leading products on the market. Rad64002233 features -cc electrode 24-084-003 100/bx. If exposed to excess gouging funes, seek fresh air immediately. 5 inches. 5” w x 0. Overall width, side to side -0. Refer to msds. Overall depth, front to back -0. 5 inches. Dimensions overall length, top to bottom -17 inches. -Unspc code 23271810. Generic dimensions -17” h x 0. Wet electrodes can flake, or splinter and are dangerous. -Electrodes must be kept dry.

 

3/8″ X 12″ Copper-Coated Pointed Carbon Air/Carbon Arc Gouging Electrode (50 Per Box) - A high grade, all purpose copperclad pointed gouging electrode. Radnor. Controlled copper coating improves electrical conductivity (for more efficient, cooler operation). Applications for these gouging electrodes are fabrication, maintenance, farms, and repair shops. Current type is direct current and the operating polarity is direct current electrode positive with reverse polarity.

 

Weldmark By ArcAir WMK400010 – CSK4000 Air Carbon Arc Gouging Torch - Heavy-duty insulators, lever and handle that are all made from fiberglass reinforced thermoset polyester molding compound to withstand the heat and be impact resistant. Forged 1-piece brass alloy body machined to close tolerances on the valve & head seat. Only angle-arc torches work efficiently with the natural angles and movements of the arm and wrist.

 

Radnor 64002230 5/8” X 3/16” X 12” Copper-Coated Flat Gouging Carbon Air/Carbon Arc Gouging Electrode (50 Per Box, 1 BOX) - Applications for these gouging electrodes are fabrication, maintenance, farms, and repair shops. Radnor. Controlled copper coating improves electrical conductivity (for more efficient, cooler operation). A high grade, all purpose copperclad pointed gouging electrode. Radnor.

 

US SELLER ,CARBON ARC GOUGING TORCH with 7′ cable replace ARCAIR K4000 NEW IN BOX 1000 AMP (ETA: 2-8 WORK DAYS) - 46 mm2 replace for arcair k4000, uses same replacement parts and insulators anchor torches will groove, bevel, cut, gouge, pierce or flush away any kind of metal. Heavy duty yet light weight 1000 amp maximum accepts pointed carbons to 1/2″ accepts flat carbons to 5/8″ delivery timeus 2-8 work days. Delivery time 2-8 work days(us) carbon arc gouging torch with 7′ cable replace arcair k4000 new in box 1000 amp k-4000 carbon arc gouging torch cable dia. The best welds torch saves time, costs less to use and gives a better finished job than older methods such as grinding, chipping etc.

 

US Seller CARBON ARC GOUGING TORCH with 7′ cable replace ARCAIR K3000 NEW IN BOX 600 AMP (ETA:2-8 WORK DAYS) - Air requirement pressure is 80 psi. Applications include medium-duty fabrication, maintenance, railroad and shipyard. 10 foot, 360 degree swivel cable. Us seller carbon arc gouging torch with 7′ cable replace arcair k3000 new in box 600 amp (eta2-8 work days). Amperage capacity is up to 600 amps.

 

Weldflame 1000 Amp K4000 Style Carbon Arc Gouging Torch with 7′ Cable - 0mm) to 1/2″(12. Accept 5/32″(4. 9mm) flat electrodes. Heavy duty 1000 amp(max) torch. 5mm) and 5/8″(15. And injection nozzle. 7mm) round electrodes and 3/8″(9. You can get one set of complete gouging torch, and more spare parts of upper and lower insulator assy.

 

5/16″ X 12″ Copper-Coated Pointed Carbon Air/Carbon Arc Gouging Electrode(50 Per Box) - 31” d. Generic dimensions -12” h x 0. Rad64002224 features -cc electrode 22-053-003 50/bx. If exposed to excess gouging funes, seek fresh air immediately. 31 inches. -Electrodes must be kept dry. -Unspc code 23271810. Dimensions overall length, top to bottom -12 inches. Overall depth, front to back -0. In case of arc rays or electric shock, employ normal first aid techniques and call a physician immediately. Overall width, side to side -0. Refer to msds. -Superior arc starting and arc stability cooler operation to maintain the diameter of the electrode at the point of the arc purified carbon content for product consistencey from lot-to-lot, run-to-run faster gouging yields, excellent metal removal rates that challenge the leading products on the market. Wet electrodes can flake, or splinter and are dangerous. 31” w x 0. If electrodes become wet, bake at 300 f for 10 hours before using. 31 inches.

 

Victor Thermal Dynamics 02991415 Tri-Arc Air Carbon Arc Gouging Torch 3/4-Inch Pad Washing Torch Only - Reliable torch design. Compressed air flows through the body and upper arm. Durable front insulators are high impact and heat resistant, and protects the torch metal parts. Rugged construction overall. Extra heavy-duty foundry. Durable front insulators are high impact and heat resistant and protects the torch metal parts.

 

Radnor 1/2” X 14” Copper-Coated Pointed Carbon Air/Carbon Arc Gouging Electrode (50 Per Box) - Dimensions overall length, top to bottom -14 inches. Refer to msds. 5” w x 0. If exposed to excess gouging funes, seek fresh air immediately. Overall depth, front to back -0. 5” d. If electrodes become wet, bake at 300 f for 10 hours before using. Rad64002226 features -cc electrode 22-082-003 50/bx. 5 inches. -Electrodes must be kept dry. Wet electrodes can flake, or splinter and are dangerous. Overall width, side to side -0. In case of arc rays or electric shock, employ normal first aid techniques and call a physician immediately. Generic dimensions -14” h x 0. -Superior arc starting and arc stability cooler operation to maintain the diameter of the electrode at the point of the arc purified carbon content for product consistencey from lot-to-lot, run-to-run faster gouging yields, excellent metal removal rates that challenge the leading products on the market. 5 inches. -Unspc code 23271810.

 

CARBON ARC GOUGING TORCH with 7′ cable replace ARCAIR K3000 NEW IN BOX 600 AMP - Up to 1000 amps. Air requirements pressure 80 psi (56kg/cm2) and flow rate 28cfm (7924l/min). Applications heavy-duty fabrication / maintenance / railroad / shipyard. Weldmark by arcair. Us seller carbon arc gouging torch with 7′ cable replace arcair k3000 new in box 600 amp (eta2-8 work days).

 

Victor Arcair 61104007 7 foot Extreme K-5 Air Carbon Arc Gouging Torch and Cable - Lever spring rated at 225 pounds per inch providing excellent clamping pressure on the air carbon-arc electrode. Overall weight is 8. Flow rate is 30 cfm. Durable front insulators are high impact, heat resistant and protects the torch metal parts. Amperage capacity is up to 1250 amps. The swivel cable features less cable twist and less strain on the operator. Heavy-duty insulators, lever, and handle that are all made from fiberglass reinforced thermoset polyester molding compound to withstand the heat and be impact resistant. Air requirement pressure is 80 psi. 8 pounds. Head assembly machined from copper alloy having 4 air holes optimizing the air flow to the arc. Victor arcair 61104007 7 foot extreme k-5 air carbon arc gouging torch and cable features a reliable torch design has been a market leader for over 60 years. High quality cable hose is the best quality cable hose that offers high heat, abrasion resistance and is non conductive. Applications include extra heavy-duty fabrication, shipyards and foundries. Features include a 7 foot swivel cable assembly. Carbon electrode range for pointed and jointed is 5/32 to 5/8 inch. There is rugged construction overall can withstand harsh environments.

 

5/32″ X 12″ Carbon Coated Pointed Air/Carbon Arc Gouging Electrode (50 Per Box) - Refer to msds. Rad64002221 features -cc electrode 22-983-003 50/bx. 16” d. Overall depth, front to back -0. 16 inches. -Unspc code 23271810. Wet electrodes can flake, or splinter and are dangerous. If electrodes become wet, bake at 300 f for 10 hours before using. 16” w x 0. -Electrodes must be kept dry. Dimensions overall length, top to bottom -12 inches. Generic dimensions -12” h x 0. In case of arc rays or electric shock, employ normal first aid techniques and call a physician immediately. If exposed to excess gouging funes, seek fresh air immediately. Overall width, side to side -0. 16 inches. -Superior arc starting and arc stability cooler operation to maintain the diameter of the electrode at the point of the arc purified carbon content for product consistencey from lot-to-lot, run-to-run faster gouging yields, excellent metal removal rates that challenge the leading products on the market.

 

1/8″ X 12″ Carbon Coated Pointed Air/Carbon Arc Gouging Electrode (100 Per Box) - 125” w x 0. Wet electrodes can flake, or splinter and are dangerous. Generic dimensions -12” h x 0. 125 inches. 125 inches. If exposed to excess gouging funes, seek fresh air immediately. 5 lbs. Overall depth, front to back -0. Dimensions overall length, top to bottom -12 inches. Overall product weight -1. 5 pounds. Refer to msds. 125” d, 1. Overall width, side to side -0. If electrodes become wet, bake at 300 f for 10 hours before using. -Electrodes must be kept dry. In case of arc rays or electric shock, employ normal first aid techniques and call a physician immediately. Rad64002220 features -cc electrode 22-023-003 100/bx. -Superior arc starting and arc stability cooler operation to maintain the diameter of the electrode at the point of the arc purified carbon content for product consistencey from lot-to-lot, run-to-run faster gouging yields, excellent metal removal rates that challenge the leading products on the market. -Unspc code 23271810.

 

FlameTech 77004007 Carbon Arc Gouge Torch, Tested in The USA - Features include high quality cable hose for heat and abrasion resistance. Flametech high quality carbon arc gouging torch leads the pack with rugged construction and reduced weight to minimize fatigue. Rugged construction for work in harsh environments.

 

61-062-016 H-3 Carbon Arc Gouging Torch With 7′ Cables - -H-3 torch w/7 sw cb. Generic specifications -natural 15 angle in torch 360 swivel cable positive grip handle. -61-062-016. Superior metal removal. Arc6106-2016 features -arcair cutting systems, replacement parts and accessories for all of your arc gouging needs. -unspc code 23171500. Clean, machine like grooves or cuts. -Excellent arc stability.

 

US SELLER ,CARBON ARC GOUGING TORCH with 7′ cable replace ARCAIR K4000 NEW IN BOX 1000 AMP (ETA: 2-8 WORK DAYS) - Flow rate is 30 cfm. Us seller ,carbon arc gouging torch with 7′ cable replace arcair k4000 new in box 1000 amp (eta 2-8 work days). Amperage capacity is up to 1250 amps. Air requirement pressure is 80 psi. Carbon electrode range for pointed and jointed is 5/32 to 5/8 inch.

 

Arcair 62991422 Extreme Air Carbon Arc Gouging Torch Foundry - Per inch providing excellent clamping pressure on the air carbon-arc electrode. Lever spring rated at 163 lbs. Head assembly machined from copper alloy having two (2) air holes per head assembly optimizing the air flow to the arc. Only arc air, the inventor of the original air carbon arc process and the industry leader for 60 years, could bring you the superb marriage of proven technology and improved design. Heavy-duty insulators, lever and handle that are all made from fiberglass reinforced thermoset polyester molding compound to withstand the heat and be impact resistant.

 

Warrior 1pc American Type Air Carbon ARC Welding Gouging Torches Electrode Holder 800Amps - Current 800amp 4. 7. Package inclduing 1pc 800amp american type gouging torch “. 5. Applicable to various metal workpieces for carbon arc air gouging 6. Without plasma cutting machine, it can be used cut stainless steel, copper etc. Remove the weld reinforcement, seal off access ramp. “Detail 1. For back gouging welding on weld seam and notching at the back, effectively gouge the defects from steel products and weld seam. American type 3. Air carbon arc gouging torch 2.

 

Radnor 1/2″ X 17″ Copper-Coated Jointed Carbon Air/Carbon Arc Gouging Electrode (100 Per Box) - Radnor air-carbon arc gouging electrodes are copper-coated and available in dc pointed and jointed in all common sizes. These versatile electrodes can be used in multiple positions and processes.

 

21-043-003 1/4″ X 12″ DC Plain Air Carbon Arc Gouging Electrode (50 Per Box) - -unspc code 23271810. -21-043-003. -Offers excellent arc stability, superior metal removal rates, resistance to breakage , heat and oxidation, uniform diameter and clean slag-free grooves. Arcair electrodes contain a precisely formulated blend of carbon and graphite that produces the most efficient metal removal performance. Material -graphite. Arc2104-3003 features -arcair carbon arc electrodes are designed especially for the air carbon-arc metal removal process which melts metal with an electric arc, then blows it away with a jet of ordinary shop compressed air.

 

Arcair 01065001 Extreme K3000 Air Carbon Arc Gouging Torch Medium Duty - Forged 1-piece brass alloy body machined to close tolerances on the valve & head seat. Lever spring rated at 146 lbs per inch providing excellent clamping pressure on the air carbon-arc electrode. Head assembly machined from copper alloy having four (4) air holes optimizing the air flow to the arc. Heavy-duty insulators, lever/handle are made from fiberglass reinforced thermoset polyester molding compound to withstand heat and impact resistant. Balanced to pivot at the center of the handle for ease of use for all gouging positions, and thereby reduces operator fatigue.

 

5/8″ X 17″ Copper-Coated Jointed Carbon Air/Carbon Arc Gouging Electrode (100 per box) - -Superior arc starting and arc stability cooler operation to maintain the diameter of the electrode at the point of the arc purified carbon content for product consistencey from lot-to-lot, run-to-run faster gouging yields, excellent metal removal rates that challenge the leading products on the market. 625 inches. 625” w x 0. Overall width, side to side -0. -Unspc code 23271810. If exposed to excess gouging funes, seek fresh air immediately. Refer to msds. Wet electrodes can flake, or splinter and are dangerous. -Electrodes must be kept dry. Overall depth, front to back -0. Generic dimensions -17” h x 0. Dimensions overall length, top to bottom -17 inches. If electrodes become wet, bake at 300 f for 10 hours before using. In case of arc rays or electric shock, employ normal first aid techniques and call a physician immediately. 625” d. Rad64002234 features -cc electrode 24-104-003 100/bx. 625 inches.

 

Victor Arcair 61065007 10 foot Extreme K3000 Air Carbon Arc Gouging Torch and Cable - Carbon electrode range for pointed and jointed is 5/32 to 3/8 inch, for flat is 3/8 by 5/32 inch and 5/8 by 3/16 inch. Air requirement pressure is 80 psi. 10 foot, 360 degree swivel cable. Applications include medium-duty fabrication, maintenance, railroad and shipyard. Amperage capacity is up to 600 amps.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.