Conduit Locknut Wrench for 1/2-Inch and 3/4-Inch Connectors, Direct Drive Heads Rotate Klein Tools 56999
- Unique design loosens or tightens connectors using a stationary twisting motion. For 1/2-inch and 3/4-inch connectors. Easily attach locknuts in tight or deep cut-in boxes. Heavy duty steel construction enables needed torque to loosen or tighten connectors. Direct-drive heads rotate each other when twisted.
Klein Tools D248-8-GLW Hi-Viz Diagonal Cutting Pliers, Angled Head Design with Short Jaws and Glow in the Dark Handles, 8-Inch
- Grips charge in natural and artificial lighting. Short jaws and beveled cutting edges permit close cutting of wire. High-leverage design rivet is closer to the cutting edge for 36-percent greater cutting power than other plier designs. Glow in the dark grips to easily locate your tool in dark or low lit areas. Angled head design for easy work in confined areas.
Klein Tools D2000-9NE-INS Insulated Lineman’s Pliers with Dual Layer Insulation Exceeding tests and Flame and Impact Resistence, 9-Inch
- Two layers of insulation provide protection against electric shock. Individually tested to exceed the iec 60900 and astm f1505 standards, for insulated tools, and clearly marked with the official 1000-volt rating symbol. High-leverage design provides 46-percent greater cutting and gripping power than other plier designs. Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool. A flame retardant, impact-resistant, bright orange outer coating.
Klein Tools 32581 4-in-1 Precision Screwdriver Set, Electronics Screwdriver with Industrial Strength Phillips and Slotted Bits
- Heat treated precision ground tip for greater strength. Rotating cap for optimum and precise control. Corrosion-resistant chrome plated barrel that includes two double-ended bits that exceed ansi standards. Four different non-magnetic tips in one tool, includes #0 and #00 phillips plus 1/8-inch (32 mm) and 3/32-inch (24 mm) slotted tips. Cushion-grip handles for maximum comfort when working on small equipment.
Side Cutter Linemans Pliers, High Leverage, 9-Inch, Streamlined Design, Color Coded Klein Tools J213-9NE
- Streamlined design with sure-gripping, cross-hatched knurled jaws. High-leverage design for 46-percent greater cutting and gripping power than other plier designs. Hot-riveted joint ensures smooth action and no handle wobble. State-of-the-art, dual-material journeyman handles provide a better grip without sacrificing tool strength and durability. Color-coded handles allow quick identification of tool. Unique handle tempering helps absorb the ”snap” when cutting wire. Soft material on outer surface for comfort and a firm grip. Precision-hardened plier head for on-the-job toughness. Induction hardened cutting knives for long life. Professional-grade materials for toughness and durability.
Linemans Pliers, Needle Nose Side Cutters, 8-Inch Alligator Pliers with Extended Handle Klein Tools D203-8
- , Jaw type smooth, nose shape standard, jaw length 2-5/16 in. , handle type dipped, material steel, side cutter yes, spring return no, voltage rating none. , Standard tool(accessory needed for tethering), tip width 1/8 in. Needle nose pliers, overall length 8-7/16 in. , Jaw width 1 in.
Klein Tools D248-8 Diagonal Cutters, Multi Purpose High Leverage Linesman Pliers with Angled Head, Standard Cut, 8-Inch Short Jaw
- Short jaws and beveled cutting edges permit close cutting of wire. High-leverage design rivet is closer to the cutting edge for 36-percent greater cutting power than other plier designs. Hot-riveted joint ensures smooth action and no handle wobble. Angled head design for easy work in confined spaces. Induction-hardened cutting knives for long life.
Adjustable Wrench, 16-Inch Construction Wrench, Fits All Nuts and Bolts Up To 1-1/2 Inch Klein Tools 3239
- Precision-machined jaws are individually chosen and assembled by hand for smooth operation. Rail is ground for precision fit. Knurl turns smoothly for easy operation. Forged from select alloy steel with continuous-taper handle for aligning bolt and/or rivet holes. Versatile wrench fits all nuts and bolts to 1-1/2-inches (38 mm).
Klein Tools HD213-9NE Heavy Duty Lineman’s Pliers with High leverage Design, Heavy Duty Comfortable Handles and Knurled Jaws, 9-Inch
- Heavy-duty, thicker dipped handles are more comfortable and easier to grab with gloved hands. High-leverage design rivet is closer to the cutting edge for 46-percent greater cutting and gripping power than other plier designs. Hot-riveted joint ensures smooth action and no handle wobble. Induction hardened cutting knives for long life. Streamlined design with sure-gripping, cross-hatched knurled jaws.
Screwdriver Phillips #2, Non Magnetic Screwdriver with 10-Inch Round Shank, Cushion Grip Klein Tools 603-10
- Premium chrome-plated for smooth feel and corrosion resistance. Cushion-grip handle for greater torque and comfort. Tip-ident quickly identifies the screwdriver type and tip orientation. Precision-machined tip provides accurate fit and torque without slippage. Internal flanges inside handle provide solid, twist-resistant blade anchor.
Klein Tools 32008 Demolition and Phillips Screwdriver Set with Plated Metal Strike Cap and Heat Treated Blade, 2-Piece
- Engineered, manufactured and tested for prying and chiseling. Includes one #2 phillips and one 1/4-inch demolition screwdriver. Heat treated blade runs complete length of handle to strike cap to transfer force. Plated metal strike cap protects handle from hammer blows. Cushion-grip handle for greater comfort and torque.
Journeyman Diagonal-Cutting Pliers Klein Tools J228-8
- Short jaws and beveled cutting edges permit close cutting of wire. Induction-hardened cutting knives for long life. State-of-the-art, dual-material journeyman handles provide a better grip without sacrificing tool strength and durability. Hot-riveted joint ensures smooth action and no handle wobble. High-leverage design rivet is closer to the cutting edge for 36-percent greater cutting power than other plier designs.
Klein Tools 55601 Cooler, Soft Lunch Box, 12-Quart Tradesman Pro Jobsite Insulated Lunch Cooler
- Lunch box stays cool for up to 12 hours. Separate upper “doghouse” compartment keeps certain items from getting squished. Fully-molded bottom protects against the elements. Cooler made of 1680d ballistic weave for durability. Insulated with double-thick, leak-resistant anti-microbial liner.
T Handle Hex Key Set with Stand, SAE, 6-Inch Blade, Chamfered End, 10 Piece Klein Tools JTH610E
- 10 pc journeyman t-handle set with stand, standard tool (accessory needed for tethering).
Klein Tools 600-4 1/4-Inch Screwdriver Heavy Duty Square Shank
- Designed for the most demanding uses. Premium chrome-plated for smooth feel and corrosion resistance. Overall length 8-11/32-inch, shank tip width 1/4-inch, shank length 4-inch. Cushion-grip handle for greater torque and comfort. Bolster reinforces shank for hard use. Heavy-duty square shank for wrench-assisted turning. Bolster reinforces shank for hard use. Klein offers a lifetime warranty on material defects and workmanship for the normal life of the product. Heavy-duty square shank for wrench-assisted turning. Designed for the most demanding uses.
Klein Tools D2000-7CST Diagonal Cutters, Slim Head Linesman Pliers is Spring Loaded, Heavy-Duty Ironworker Pliers Cut ACSR, Screws, and More
- Spring-loaded action for self-opening. Plastic-dipped handles for comfort and ease of identification. Precision-hardened plier head for on-the-job toughness. Unique handle tempering helps absorb the ”snap” when cutting wire. Custom, us-made tool steel. ”Handform” handles for full gripping and cutting power. Induction hardened cutting knives for long life. Cuts acsr, screws, nails and most hardened wire. Twists and cuts soft annealed rebar tie wire. Hot-riveted joint ensures smooth action and no handle wobble.
#2 Square Recess Screwdriver, 8-Inch Shank Klein Tools 666
- Works on most combination head receptacle, switch and panel screws. Special heat-treated, chrome plated shaft for corrosion resistance. Internal flanges inside handle provide solid, twist-resistant blade anchor. Cushion-grip handle for greater torque and comfort. Tip-ident color-coded handle end quickly identifies the screwdriver type and tip orientation.
Klein Tools J203-8 Journeyman Heavy-Duty Side-Cutting Long-Nose Pliers, 8-Inch
- Hot-riveted joint ensures smooth action and no handle wobble. Needle nose plier with heavier design for greater cutting power. Induction hardened cutting knives for long life. Extended handles provide added reach and leverage. Slim head design for working in confined areas.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
